Mycotoxins in feed are not always visible
Mold on silage is a clear warning sign. The problem is that the absence of visible mold does not automatically mean the absence of mycotoxins.
Mycotoxins are substances produced by certain fungi. They can be found in grain, silage, hay, and other feed components, among other things. Research on TMR also shows that the simultaneous presence of several different mycotoxins is not uncommon.
In short: The best protection for a herd is not a single product, but a whole system: the quality of raw materials, proper harvesting and storage, TMR control, animal observation and appropriately selected nutritional support.
Why might a problem go unnoticed?
Thanks to rumen microorganisms, cattle can partially metabolize some mycotoxins. However, this does not guarantee complete protection.
With prolonged exposure, problems can be nonspecific. Instead of a single, obvious symptom, farmers may observe a decline in feed intake, digestion, condition, or production. This is why it's difficult to assess risk based solely on the appearance of feed.
Where to look for risk?
In practice, it is worth paying regular attention to:
- quality of silage after opening the silo,
- the speed of selection and heating of the feed,
- component batch changes,
- visible mold outbreaks,
- moisture content of raw materials,
- method of storing concentrated feed,
- sudden or unexplained changes in TMR intake.
If a problem is suspected, laboratory analysis is the most reliable. It allows us to move beyond guesswork and verify the actual quality of the material.
Why is it worth looking at feed intake?
Feed is one of the largest costs in milk production. Therefore, the problem doesn't end with the question, "Does feed contain mycotoxins?".
The question is also important: Is the cow using this feed as well as it should?
If we spend money on preparing a good dose and at the same time there are factors limiting its use, the farm loses twice.
This is particularly important in times of economic downturn in the milk market, when the possibilities of improving the selling price are limited and controlling costs and losses within the farm becomes more important.
How it works Rumitox Stop?
Rumitox Stop is a feed additive intended for use in periods of risk of mycotoxin occurrence.
Its formula combines yeast products, bentonite, activated carbon, and sepiolite. The product supports mycotoxin neutralization, intestinal microflora, and stable digestion. According to current guidelines, it can be administered prophylactically at a rate of 0.5–1 kg per ton of feed, and in cases of increased risk, 1–2 kg per ton. Individual dosage is 25–100 g per cow per day.
The most important thing, however, is to properly set the role of such a product.
The binding additive does not replace good quality feed. It is part of the overall risk mitigation program.
5 Practical Rules for Reducing Mycotoxin Risk
- Check the quality of raw materials before introducing them into the dose.
- Take care to prepare and select silage correctly.
- Don't ignore sudden changes in feed intake.
- If you suspect a problem, perform a laboratory analysis.
- Consider the permanent or periodic use of an appropriate additive if the risk on your farm is increased.
The greatest value comes from not reacting only when results start to decline, but by mitigating risk earlier.
