What will you learn?
- What determines the energy needs of a dairy cow in different stages of lactation?
A dairy cow's energy requirements vary with body weight, yield, milk composition, and stage of lactation. The most challenging period is the beginning of lactation, when milk production increases faster than dry matter intake. Therefore, the ration must be divided into technological groups, rather than uniformly for the entire herd.
- What energy and fiber concentration should a TMR ration have for dairy cows?
The TMR ration should combine appropriate energy concentration with safe fiber levels to provide energy without destabilizing the rumen. For cows around 650 kg, a crude fiber intake of 6.7–7.1 MJ NEL/kg DM in mid-lactation and 6.3–6.7 MJ NEL/kg DM in late lactation is typically recommended, with the crude fiber content increasing as lactation progresses.
- Why does the quality of silage and haylage have such a large impact on energy for cows?
The quality of roughage determines how much energy a cow actually recovers from a ration, even if she consumes a large volume. Poorly digestible or poorly preserved silage reduces energy balance, so each new pile and change of feed batch must be confirmed by NEL, fiber, starch, and digestibility analysis.
- Can excess concentrate feed in TMR for dairy cows harm the herd?
Yes, too much concentrate in TMR increases the risk of acidosis and rumen dysfunction, even if it temporarily increases the energy content of the ration. As concentrates approach approximately 55–601 TP3T dry matter, decreased rumination, fluctuating intake, looser stools, and metabolic problems are more common.
Energy for cows determines milk yield, rumen health, and reproductive performance. This article explains how to measure it, what energy concentration should be in TMR, and how to avoid the consequences of deficiency or excess in the herd.
What will you find in the article?
What is energy for cows and how to measure it
Energy for cows In practice, it's the fuel necessary to maintain basic life functions, milk production, reproduction, immune system function, and post-calving recovery. If the feed ration only meets needs "on paper," but the feed is poorly digestible or the cow consumes too little dry matter, a negative balance quickly arises. Therefore, the "plenty of feed" record alone doesn't indicate whether the herd is actually getting the energy it needs.
In dairy cattle nutrition you will most often encounter three ways of describing energy: NEL, i.e. net energy of lactation, MJ, i.e. megajoules, and JPM, or milk production units. These systems are used to compare feed values and calculate whether the ration meets the cow's needs at a given production stage. It's crucial to always stick to one system when making comparisons, as the same feed can look different depending on the unit used.
NEL, MJ and JPM – how to read energy units
The most practical unit for daily ration balancing is the NEL, expressed in MJ. This represents how much feed energy a cow can realistically utilize for maintenance and lactation. In Poland, the JPM is still common. A simple conversion is as follows: 1 JPM = 1700 kcal = 7.12 MJ NEL. This allows you to quickly compare the feed additive label, silage analysis results, and TMR ration assumptions.
It's also worth remembering that the MJ figure alone isn't enough if you don't know what it refers to. You'll evaluate the energy in 1 kg of dry matter (TMR) differently, the energy needed for 1 kg of milk differently, and the daily requirement of an entire cow differently still. For example, a ration with a concentration of 7.2 MJ NEL/kg DM may be very good for a freshly calved cow, but that same figure won't tell you anything without knowing how much dry matter the animal is actually consuming.
Energy for maintenance and energy for milk production
Every cow first requires energy for maintenance. Only the surplus above its daily needs can be used for milk production, recovery, or reproduction. According to new recommendations from the Finnish Luke Institute, which will be in effect from 2026, the maintenance requirement is 0.63 MJ per kg of body weight to the power of 0.75, and the energy for milk production is 5.0 MJ for every 1 kg of ECM per day. .ECM stands for energy-corrected milk, meaning it takes into account the composition of the milk, not just the liters.
This distinction has significant practical implications. A cow may consume a seemingly high intake, but if most of her energy is used for maintenance and to cover post-calving losses, there will be insufficient milk left. energy for cows It should be calculated not only per individual, but also based on specific body weight, lactation stage, and yield. Feeding a 600 kg cow producing 22 kg of milk is different from feeding a 700 kg cow producing 40 kg of ECM.
💡 How to quickly convert energy: 1 IU = 1700 kcal = 7.12 MJ NEL. Always check the feed value system before comparing two mixtures.
What determines the energy needs of a dairy cow?
Requirements aren't constant year-round, or even throughout lactation. They increase with body weight, milk yield, milk fat content, and metabolic load after calving. To accurately assess whether the ration is accurate, you need to consider several parameters simultaneously. Calculating only "liter" is one of the most common causes of underestimating energy.
Body mass and living energy
The larger the cow, the higher the demand for maintenance. For a cow weighing 600 kg living needs are approximately 35.5 MJ NEL per dayFor the cow 700 kg it is already about 39.9 MJ NEL per day. A difference of nearly 4.4 MJ per day may seem small, but over a month it adds up to over 130 MJ, which is the real cost of a balancing error.
In practice, this means that larger cows require a higher energy intake or higher dry matter intake. If you have lighter and heavier cows in the same group, the herd average may mask the problem. Some cows will function normally, while others will begin to lose condition despite the same TMR.
Lactation phase and energy levels
The greatest challenge occurs at the beginning of lactation. At this point, productivity increases faster than dry matter intake, so the cow easily enters a negative energy balance. In mid-lactation, the situation usually stabilizes, and in late lactation, requirements decline due to lower milk production. Therefore, maintaining the same energy level in the ration throughout the entire lactation is simply not accurate.
This is why the ration is grouped or at least divided into production stages. Newly calved cows require not only a higher energy concentration but also very stable rumen function. A mistake made in the first weeks of lactation will later impact performance, metabolic health, and pregnancy success.
How Fat in Milk Changes Your Needs
The composition of milk has a direct impact on how much energy is needed. According to DLG tables 1 kg of milk requires approximately 2.9 MJ NEL by 3.0% fat, about 3.1 MJ by 3,5%, about 3.3 MJ by 4,0%, about 3.5 MJ by 4,5% and about 3.6 MJ by 5,0%. The difference between 3.0% and 5.0% of fat is as much as 0.7 MJ per kilogram of milk.
If your cow gives 30 kg of milk, the difference can be approximately 21 MJ NEL per day. This is the level that can determine whether the dose is safe or already deficient. Therefore energy for cows should be calculated not only on the yield in kilograms of milk, but also on its parameters. High fat doesn't always indicate a problem, but it always means a higher energy cost of production.
What energy concentration should a TMR dose have?
A well-balanced TMR must combine appropriate energy concentration with a safe fiber structure. Simply attempting to "boost" the ration with concentrate feeds produces only short-term results and usually results in rumen problems. High milk production requires precision, not maximizing grain in the mix.
Recommendations for early, mid and late lactation
For a cow weighing approximately 650 kg The recommended energy concentration in TMR is as follows: 7.1–7.5 MJ NEL/kg DM in early lactation, 6.7–7.1 MJ NEL/kg DM in medium lactation and 6.3–6.7 MJ NEL/kg DM in late lactation. These ranges are practical because they show that not every group needs the same "strong" dose.
If energy concentration falls below these ranges, the cow must compensate with higher dry matter intake. This only works up to a point. A freshly calved cow typically cannot consume enough to fully meet its needs, so the quality and energy density of the ration are particularly important.
How much fiber does the rumen need?
The ration isn't just about energy, but also how to safely deliver it. The rumen needs adequate fiber to maintain proper rumination, salivation, and pH. In practice, the proportion of crude fiber in the dry matter of the rumen rumen for early-lactation cows should be approximately 21–24%, in the average 25–26%, and in the late 27–28%. These are values that help protect rumen fermentation.
Equally important is NDF, or neutral detergent fiber. It structures the ration and slows down excessively rapid starch fermentation. If the ration is high in energy but low in effective fiber, you risk a drop in ruminal pH, poor feed intake, looser feces, and poor nutrient utilization.
When the share of concentrate feed becomes risky
Concentrated feeds are necessary, but excess amounts quickly become expensive. When the share of concentrates in the dry matter TMR approaches the limit 55–60%, the risk of acidosis and rumen dysfunction increases. This dose may temporarily increase energy, but if it is not accompanied by the appropriate amount of roughage and well-balanced fiber, side effects may occur: decreased rumination, fluctuating intake, laminitis, and metabolic problems.
In practice, it is safer to improve energy concentration through better quality silage, appropriate starch content, and controlled energy supplements than by simply adding more kilograms of meal. This is where we see that energy for cows it's not just the number of MJ in the table, but the whole way of building the dose.
⚠️ Limit for concentrated feed: When concentrate feed exceeds approximately 55-60% dry matter TMR, the risk of acidosis and rumen disorders increases.
Why the quality of roughage determines the energy balance
In many herds, the problem isn't too little feed, but rather the low energy value of the silage or haylage. A cow can consume a full ration and still not meet its needs if the forage is poorly digestible, harvested too late, or poorly preserved. This is why forage analysis is more valuable than a "glance" assessment.
How to read the energy classes of roughage
When evaluating roughage, a simple division according to NEL content is useful. very high energy efficiency has above 6.5 MJ NEL, high 6.0–6.5 MJ, medium high 5.5–6.0 MJ, average 5.0–5.5 MJ, low 4.5–5.0 MJ, and very low below 4.5 MJ. For a high-yielding herd, the difference between 6.4 and 5.2 MJ NEL in corn or grass silage is not a detail, but a real change in economic performance.
If the TMR is based on feed from lower energy classes, you'll try to compensate with concentrates. This typically increases the cost of the ration and increases the risk of health problems. Better silage improves energy balance without dramatically shifting the ration structure toward concentrates.
What does silage and haylage analysis show?
A laboratory test tells you much more than just "how much dry matter there is." The analysis will show you, among other things, NEL levels, fiber, starch, protein, and parameters affecting digestibility. Digestibility determines how much energy a cow will actually recover from a given feed. Two silages with similar appearance can differ so significantly in their utility that one will be the basis of a ration for fresh cows, while the other will be feed for a group of end-of-lactation cows.
In practice, it is worth analyzing every new pile, change in haylage batch, and every significant change in intake or milk yield. If the result shows a decrease in energy by 0.5–1.0 MJ NEL/kg DM, then with an intake of 20 kg of dry matter per day, this means even 10–20 MJ NEL less per cow. Such a loss is difficult to make up for without correcting the entire dose.
An example of energy deficit in a high-yielding herd
In studies involving cows weighing approximately 600 kg and performance to 40 kg of milk per day demand was estimated at the level 162.3 MJ NEL per day. At the same time, the dose collection only provided 131.3–138.2 MJ NEL. This means a deficit of around 24–31 MJ NEL per day. Such a large shortage is usually not caused by a single error, but by a combination of several factors: too weak silage, too low dry matter intake, and underestimating production needs.
That's why ration evaluation should begin with the roughage. If the foundation is weak, no supplement will fully address the problem. A supplement may provide temporary relief, but it's no substitute for good silage with high digestibility and a predictable NEL.
Energy deficiency and excess: effects on health, performance and reproduction
In cow nutrition, two things matter: meeting their needs and maintaining a safety margin. Both energy deficiency and excess have costs. The difference is that a deficiency is more readily apparent in milk and condition, while an excess is more likely to manifest later, especially around calving and during reproduction.
Symptoms of energy deficiency
The most typical signals are: decrease in milk yield, loss of BCS condition, poorer feed intake and greater risk ketosis. A cow that doesn't get the energy it needs for a long period of time begins to mobilize body reserves. At first, this may seem like "natural post-calving deconditioning," but if the process is too profound or too prolonged, metabolic health and immunity deteriorate.
A further consequence is poorer reproductive performance: later heats, lower conception rates, and more open days. Energy deficiency also reduces the body's ability to cope with the demands of lactation. As a result, even a seemingly minor adjustment in rationing can later determine whether the cow quickly recovers after calving.
What are the dangers of excessive fitness?
Excess energy is most often seen during dry periods and in cows that are too fat at calving. Excessive body condition increases the risk of difficult calvings, metabolic disorders, a poor start to lactation, and problems such as mastitis and poorer fertility. Such a cow is not "strong," but rather metabolically more risky.
The problem is that overfeeding the cows with energy for several weeks before calving can paradoxically worsen feed intake after calving. This, in turn, promotes a negative energy balance, a situation you want to avoid anyway. Therefore, overfeeding dry cows is just as serious a mistake as underfeeding fresh cows.
The most difficult moments: drying off and the start of lactation
Two critical stages are the end of the dry period and the first few weeks after calving. During the dry period, it's important to ensure the cow doesn't go into labor with excessive BCS. After calving, the most important thing is to quickly stabilize intake, rumen function, and energy supply. This is when support measures are most often implemented, but only as part of a broader plan.
If the transition between these two periods is well-managed, it is easier to maintain performance, health, and fertility throughout the remainder of lactation. If not, costs rebound in the form of treatment, poorer performance, and greater herd variability.
How to Safely Support Energy in Your Herd Every Day
Daily practice should be based on three pillars: forage analysis, dry matter intake monitoring, and targeted support only where appropriate. Energy supplements can be very useful, but they work best when the basic ration is well-calculated and stable. They cannot replace poor silage, inaccurate TMR, or poorly organized processing groups.
When to use glycerin and calving support
Pharmaceutical glycerin is one of the most commonly used tools when quick energy support is needed. It is especially effective in the period around calving, at the onset of lactation, and when the risk of ketosis or a significant negative energy balance increases. In such situations, quick-acting solutions are used to help stabilize metabolism at the most difficult time.
An example of practical support could be Energymax Vit, an energy supplement based on pharmaceutical glycerin with a high vitamin content. Farms also use calving supplements, such as Maxdrink, which supports the collection and development of rumen microflora after calving, and solutions aimed at preventing ketosis, such as Ketostop bolus. However, it is crucial that such products are selected for the specific cow's situation and not routinely administered without herd assessment.
Why choose protected fats?
Protected fats, also known as bypass fats, are useful when you want to increase the energy concentration of a ration without overloading rumen fermentation. This is especially important for high-yielding cows, which are unable to consume more dry matter but still require a higher energy intake. Protected fat largely bypasses the rumen and is utilized further in the digestive tract, so it doesn't have the same destabilizing effect as excess fermentable carbohydrates.
However, the proportions must be maintained. If the fat content in the dry matter of the dose is close to 5% or more, choosing a fat source requires caution. Simply increasing fat "at random" can compromise fiber intake and digestibility. In practice, bypass fats are treated as a precision tool, not a universal solution for every weak intake.
How to monitor the effectiveness of your dose and supplementation
The best results are achieved by regularly monitoring several indicators simultaneously. It's worth keeping an eye on:
- dry matter collection per group and per animal,
- milk yield and its fat and protein,
- changes in BCS before and after calving,
- the frequency of cases of ketosis, abomasum displacement and other metabolic disorders,
- stool quality, rumination and stability of TMR collection,
- analysis results of each new batch of silage and haylage.
If, after adjusting the ration or implementing a supplement, you see improved intake, smaller BCS drops, and more stable milk parameters, it's a sign that the direction is right. However, if the concentrate content increases, cows are ruminating less, and fecal fluctuations occur, it's time to go back to basics. This is how to build an effective energy for cows: through balance, dose structure and continuous monitoring, not through one-off interventions.
✅ Control that gives you the advantage: Analyze silage at each new pile and record DM intake. This often identifies energy deficits more quickly than a decline in milk yield.
Frequently asked questions
How much energy does a 600 kg dairy cow need?
For maintenance alone, it needs about 35.5 MJ NEL per day. In addition, there's the energy from milk: 30 kg of milk with 4.01 TP3T fat provides about 99 MJ NEL, so the total requirement exceeds 130 MJ NEL per day.
What does NEL mean in cow nutrition?
NEL is the net lactation energy, which is the portion of feed energy actually available to the cow for maintenance and milk production. In Poland, it is often compared to UFH; 1 UFH corresponds to 7.12 MJ NEL. This makes it easier to assess whether the ration meets the herd's needs.
How much energy should a TMR have at the beginning of lactation?
For a cow weighing approximately 650 kg, 7.1-7.5 MJ NEL per 1 kg of dry matter TMR is typically recommended. This ration must also contain adequate fiber, as high energy without structure increases the risk of acidosis.
What are the symptoms of energy deficiency in cows?
The most common effects include decreased performance, loss of BCS, poorer feed intake, and an increased risk of ketosis. In the long term, decreased fertility, pregnancy problems, and compromised immunity also occur.
Does high fat in milk increase energy needs?
Yes. According to DLG tables, 1 kg of milk with 3.01 TP3T fat requires about 2.9 MJ NEL, and with 5.01 TP3T about 3.6 MJ. Therefore, the dose should be calculated not only in terms of liters of milk, but also in terms of its composition.
When is it worth giving a cow glycerin or energy supplement?
Most often, it is used around calving, at the beginning of lactation, and when there is a risk of negative energy balance or ketosis. Pharmaceutical glycerin can quickly support energy supply, but it works best as part of a nutritional plan, not as a replacement for an unbalanced diet.
A well-calculated energy ration simultaneously impacts milk yield, metabolic health, and reproductive performance. The most reliable approach is a combination of high-quality forage, appropriate TMR structure, and continuous monitoring of herd intake and condition. If you want to improve performance, start with data from feed and technological groups, and only then select additional support.
Find out more – Click here: https://ruminta.eu/
