What to feed beef bulls: feeding rules for good growth

What will you learn?

  • How to adjust the nutrition of beef bulls to the different phases of fattening?

    Feeding beef bulls must be tailored to their growth phase, as a younger bull at the beginning of fattening has different needs than a heavier animal at the end. At the beginning, the goal is high feed intake and a safe transition to more intensive feeding, while towards the end, energy concentration and controlled ration utilization become more important.

  • What roughage forms a good basis for a ration for beef bulls?

    A good ration base for beef bulls is high-quality bulk feed, primarily corn silage, with supplementary grass and legume silage. The result is determined not only by chemical analysis but also by dry matter, feed structure, digestibility, and quality of preparation, as poor or poorly harvested silage reduces energy intake and utilization.

  • Why is the structure of the ration so important in the nutrition of beef bulls?

    The structure of the ration is crucial because it influences rumination, buffering of rumen contents, and even feed intake by beef bulls. A mixture that is too fine can restrict rumination, while too long can hinder mixing and promote sorting. Therefore, the ration should be designed so that the animals eat calmly and do not select only a portion of the feed.

  • How to assess whether a feed ration for beef bulls works in practice?

    The effectiveness of a ration for beef bulls is assessed by stable growth, good feed intake, and the animals' calm response to dietary changes. Regular weighing or weight estimation is essential, as well as monitoring group uniformity, appetite, rumination, and droppings, as these signals provide the quickest indication of whether the ration is being used effectively.

Find out what to feed beef bulls to achieve high growth without compromising rumen health. This article covers ration planning for each phase of fattening, feed proportions, and tips on protein, energy, and supplements to support feed utilization.

What to base the feeding of beef bulls on in different phases of fattening?

If you want to set the belt correctly, the answer to the question what to feed beef bulls it always starts with one rule: the dose must be adjusted to growth phases. Younger bulls are fed differently at the beginning of fattening than those in the final phase, when the goal is a high final weight and efficient energy utilization. In practice, the basis of the ration is most often corn silage, but its proportion, the amount of concentrate, and the protein level should vary with body weight.

In Polish conditions, with a well-balanced ration in the first phase of fattening, gains of up to 1.5-2.0 kg per day. This is a good reference point, but only if the feed is of good quality, the animal has constant access to water, and there are no drastic changes in diet. In late-maturing breeds, the final weight is often within the range 700-800 kg at the age of about 24-30 months.

The first phase of fattening

At the start of fattening, the most important thing is to build a high feed intake and safely transition to more intensive feeding. In this phase, the ration is usually based on corn silage, supplemented with concentrate and protein components. Younger bulls respond well to energy, but also require more protein to build tissue. Therefore, silage alone is not enough, even if it is of very good quality.

In practice, a better model at the beginning of the fattening period is one in which the volumetric feed ensures rumen stability, while the concentrated feed gradually increases energy concentration. This is the easiest time to make a mistake: adding grain or ready-made mixes too quickly. The effect can seem good for a few days, but then decreases intake, looser stools, reduced rumination, and poorer growth occur.

Finishing phase

The final fattening phase follows a different logic. The animal is heavier, consumes more dry matter, and the ration must provide more energy per kilogram. This is why the proportion of concentrates, which often constitute more than 50% of the dry weight of the dose. However, the importance of very high protein levels is decreasing as the animal devotes an increasing portion of its energy to tissue deposition and improving carcass finish.

This doesn't mean, however, that finishers can be fed „richly” without supervision. The more starch and concentrates, the more important the feed structure, the quality of the TMR mix, the feeding rate, and monitoring of droppings and appetite. It's easy to improve the energy concentration on the paper in the finisher, but just as easy to compromise rumen health, which immediately impacts feed utilization.

Target gains and final weight

A good fattening program should be planned not only for today, but for the entire cycle. If you're targeting late-maturing breeds, a sensible approach is to achieve 700-800 kg final weight. In lighter systems or with crossbreeds, results can be lower and still be economically viable. The most important thing is that the final weight is the result of steady gains, not a short „pumping” of substantial nutrients at the end.

That's why the question what to feed beef bulls It's worth replacing them with more practical considerations: what ration to set for a given body weight, what growth you want to achieve, and whether the rumen is keeping up with the energy levels. Only the combination of these three elements produces a result that can be seen on the scale and in feed costs per kilogram of gain.

💡 Corn is the base, not the whole dose: Good corn silage provides a lot of energy, but usually only 80-90 g protein/kg DM. Without added protein, it is difficult to maintain intensive fattening.

What roughage provides the best ration base?

The foundation of the fattening is high-quality roughage. They increase intake, stabilize rumen fermentation, and reduce the risk of metabolic problems. If you're wondering what to feed beef bulls, first assess your feed volume. Even the best-chosen, high-content mix won't compensate for poor silage, a heated stack, or too wet, low-palatability feed.

Corn silage: the most important parameters

Corn silage is most often the basic feed in fattening because it combines high energy concentration with good intake. Silage with a dry matter of approximately 30-35%, structural fiber content of the order of 33-40% dry matter and the energy reaching 11 MJ ME/kg dry matter. With these parameters, you can count on a good base for intensive growth.

The problem is that corn silage usually only has 8-9% protein in dry matter, i.e. approximately 80-90 g/kg dry matter. It is high in energy but low in protein. Therefore, on its own, it usually allows for gains of around 1.0 kg per day, while with intensive fattening you need support with concentrated feed and a high-protein component.

Harvesting technique is also worth considering. Proper cob grinding improves starch utilization, while the appropriate cutting length influences ration structure and rumination. If you see a lot of whole kernels or larger cob fragments in the stool, some of the energy is simply passing through the digestive tract unused.

Grass and legume silages

High-quality grass or legume silages are a valuable addition to the ration, especially if you want to improve protein levels and structure. Their protein content can be 15-22% dry matter, so they effectively compensate for the deficiency resulting from feeding corn. However, not every batch is suitable for intensive fattening. Silage harvested too late can be fibrous, less digestible, and less digestible.

In practice, it's best to treat them as a balancing element, not an incidental addition. Well-made alfalfa silage or a grass-legume mixture helps stabilize the rumen and increase the total protein level in the ration. This is especially useful at the beginning of fattening, when the bull is more sensitive to amino acid deficiencies needed for muscle growth.

Feed structure and corn preparation

Chemical analysis alone is not enough. It also counts physical structure of the feed, or how the material behaves in the feed trough and rumen. Silage cut too finely reduces chewing and buffering of the rumen contents by saliva. If cut too long, mixing the ration becomes difficult and reduces uniform intake. In practice, a good structure is one in which the animals eat willingly, chew calmly, and do not sort the mixture.

The maturity of the cobs at harvest is also important. The kernels should be well developed and the base of the kernel darkened, as this usually indicates a better compromise between yield, starch digestibility, and whole plant dry matter. If you're asking, what to feed beef bulls, the answer is: not only with appropriate raw materials, but also with properly prepared silage, which actually provides energy to the animal.

How much concentrated feed and protein do beef bulls need?

Once the volume base is good, the next step is to determine how much concentrate and protein to add. This is where profitability is most often the deciding factor. Too little energy or protein means slower growth. Too much, especially if fed in the wrong form, means higher costs and a greater risk of digestive disorders. Therefore, the answer to the question what to feed beef bulls must include not only the raw materials, but also their proportions.

Protein share at the beginning of fattening

At the beginning of fattening, when the ration is based on maize silage, the share of high-protein components in the concentrate feed should usually be approximately 20-30%. This level helps compensate for the low protein content in corn and maintain a high growth rate. The better growth you want to achieve, the less room there is for haphazard balancing.

In practice, high-protein feeds include components such as post-extraction meals and other protein mixtures used in beef cattle feeding. Their selection depends on the entire ration, not just the protein percentage on the label. If the bulk feed is less digestible, simply increasing the protein won't solve the problem. The animal must also have energy and a healthy rumen to utilize this protein.

Less protein in the finish

In the final phase of fattening, the share of high-protein components usually decreases to approximately 10-15% of the concentrated portion of the dose. This is natural, because as body weight increases, the efficiency of protein utilization for building new tissue decreases, and energy becomes more important. During this period, excessively expensive protein can simply worsen nutritional cost without significantly improving growth.

However, the point isn't to go too low on protein at the finish. If the ration is too „energetic” and too low in protein and minerals, the animal may not utilize the feed effectively, intake will deteriorate, and growth will become less stable. Finishing is a stage of precision, not simplification.

What to look for besides protein percentage

In the nutrition of fattened animals, not only the amount of protein is important, but also its degradation in the rumen and amino acid profile. Simply put, it's important to determine how much of the protein will be utilized by the rumen microflora and how much will continue to the small intestine. Two mixtures with similar total protein levels may perform differently if they have different raw material compositions and digestibility.

Therefore, it's worth looking beyond just a single number in the table. A good ration for a beef cattle should combine energy, protein, structural fiber, minerals, and palatability. If one of these elements is lacking, the animal will most often show this through decreased intake or poor growth. In practice, it's not the spectacular errors that cost the most, but rather minor inconsistencies persisting over several months.

⚠️ Don't increase your daily intake: A sudden increase in starch increases the risk of rumen acidification. Increase concentrates gradually and monitor the animals' appetite, stools, and behavior.

How to Safely Increase Energy and Starch Without Risking Acidity

In intensive fattening, energy determines the growth rate, but it is energy that most often „damages” the rumen if fed too aggressively. Starch from corn, grain, and concentrates strongly supports growth, but excessive starch or feeding it too quickly can lead to acidosis. Therefore, safely increasing energy relies on gradually increasing the dose concentration, not on a one-time change of recipe.

How to introduce concentrate feed

Introduce concentrate feed in stages, especially at the beginning of fattening and after each major change in silage batches. The animal needs time for its rumen microflora to adapt to the increased amount of rapidly fermentable carbohydrates. If you increase concentrates too quickly, you may initially see an increased appetite, but then fermentation imbalances will develop.

A safe practice is to increase the concentrate portion in small increments and observe the herd for a few days after the change. Look for three things: whether the bulls approach the feeder as readily, whether the number of animals ruminating after feeding decreases, and whether the stools become too thin, foamy, or contain visible remnants of undigested grain.

The role of starch and fiber

Starch provides more readily available energy than fiber, so it effectively fuels growth. The problem arises when it displaces too much structure from the ration. The rumen functions stably when the animal has something to chew and produces an adequate amount of saliva, which naturally buffers the chyme. Structural fiber, therefore, isn't „ballast,” but rather a safeguard for energy utilization.

In practice, a good ration for beef cattle is one that combines high-energy corn silage with concentrates without sacrificing physical structure. If the TMR is too fine, sorted, or over-dried, the risk of acidification increases even with a theoretically correct balance. This is one reason why laboratory analysis should be combined with daily monitoring of the feedlot and animal behavior.

When to adjust the dose

The rule of thumb is that the dose should be adjusted approximately every 50-60 kg body weight. This rhythm allows you to adjust energy and protein levels to the actual needs of the growing animal. Waiting too long to make adjustments can easily miss the moment when the animal could be consuming and utilizing feed more intensively. Conversely, too frequent and erratic changes hinder the stabilization of the rumen microflora.

It's also worth adjusting the ration if the silage batch changes, intake drops, group uniformity deteriorates, or weighing results deviate from the target. In intensive fattening, corrections are not a sign of error, but a normal part of feeding management.

✅ Water often limits growth: Cattle require approximately 5-7 kg of water per 1 kg of dry matter feed. Water deficiency reduces intake, and even the most optimally balanced ration becomes less effective.

Minerals, vitamins, water and additives supporting feed utilization

Even very good silage and well-calculated concentrates don't end the nutrition issue. In fattening, they also play a huge role. minerals, vitamins, constant access to water and functional additives. These aren't „just in case” additions, but rather elements that often determine whether an animal will utilize the full potential of a ration. Skipping this area can result in seemingly adequate nutrition but poorer results than expected.

Mineral and vitamin premix

Corn silage and most roughage are usually low in calcium, phosphorus and some vitamins. Therefore, a vitamin-mineral mixture should be a permanent component of the diet, not a supplement used only periodically. Deficiencies are not always immediately apparent. More often, they manifest indirectly: decreased appetite, poorer feed conversion, poorer growth, or reduced resistance to nutritional stress.

A well-chosen premix should match the type of ration. If the diet is based primarily on corn and grains, the importance of mineral balance increases even more. In practice, it's worth monitoring not only the energy and protein intake but also the overall nutritional profile, as this is where growth often falters.

Water and feed intake

Cattle need approximately 5-7 kg of water per 1 kg of dry feed. This means that a bull consuming 10 kg of dry matter may need 50-70 liters of water per day, and even more so during hot weather. Water directly affects feed intake, rumen fermentation, and overall animal comfort. If there's too little or it's dirty, intake drops faster than farmers typically anticipate.

In practice, it's important to monitor not only access but also the efficiency of waterers, cleanliness, and the number of watering points in the group. A common mistake is that the ration is calculated correctly, but some bulls have limited access to water after feeding. In this case, the feeding „on paper” is accurate, but the results in the barn are not.

Additives to support the rumen and energy

During periods of ration changes or during intensive fattening, functional additives can be useful to support fermentation stability and energy balance. After switching to a more substantial ration or changing silage batches, it makes sense to support ruminal microflora, as it is responsible for the utilization of starch and fiber.

In such situations, solutions targeted at a specific problem are used. Maxdrink can support the development of ruminal microflora after ration changes, which helps to better utilize concentrates and starch. Diablock it is worth considering when the risk of fermentation disorders associated with a higher proportion of starch and sugars increases. Ketostop or Energymax Vit They can support energy balance during intensive fattening, especially when intake temporarily drops and energy needs remain high. Such supplements won't replace a well-balanced ration, but they can help you get through the most sensitive periods without compromising performance.

How to judge if a dose is working: increments, intakes, and adjustments

A good dose isn't the one that looks correct in the table, but the one that produces a stable result in the barn. If you want to make a fair assessment, what to feed beef bulls In your situation, you need to check three things regularly: growth, feed intake and animal response to changes. Without this, even a properly balanced recipe remains just an assumption.

How to measure growth

The simplest and most honest method is to regularly weigh or estimate weight at repeated intervals. It's best to do this every few weeks and compare the result with the target for the group. If you're assuming 1.5-2.0 kg of weight gain per day, and in reality it is 1.1-1.2 kg, it is a signal that something is limiting the use of the dose.

It's important to look not only at the average, but also at the group's balance. If some bulls are growing very well while others are significantly lagging behind, the problem may be related to access to the feed table, competition within the group, health, or uneven ration mixing. The average alone can then conceal real losses.

The most common nutritional mistakes

When results fall short of plan, first check the basics. In fattening, failures are most often caused not by one spectacular mistake, but by several minor shortcomings: poor silage, insufficient protein, increasing the concentrate too quickly, limited access to water, or failure to adjust the ration after weight gain. These are the elements most often responsible for the disconnect between theory and practice.

  • too poor quality corn silage or a heap that is getting too hot,
  • basing the entire ration solely on corn without any sensible protein supplementation,
  • a sudden increase in the share of concentrated feed and starch,
  • too little structural fiber and too small a dose,
  • no mineral and vitamin premix,
  • insufficient access to fresh water,
  • no dose adjustments every 50-60 kg of body weight,
  • assessing the effects „by eye” without weighing and observing the stool and chewing.

If you go through this list point by point, you'll usually find the reason for the underperformance pretty quickly. In practice, the answer to the question what to feed beef bulls It doesn't end with the choice of feed. Equally important is how consistently you monitor its quality, intake, and the animals' response to any changes in the ration.

Frequently asked questions

Can beef bulls only eat corn silage?

It can be a base ration, but on its own, it's usually not sufficient for intensive fattening. It has high energy, up to 11 MJ ME/kg DM, but only about 80-90 g protein/kg DM. Without added protein and concentrate feed, growth often stalls at around 1.0 kg/day.

How much concentrated feed should be given to bulls in the final phase of fattening?

In the finishing phase, the proportion of concentrates typically exceeds 50% of the ration's dry matter. This level increases energy concentration but requires good feed structure and a gradual increase in starch content. Too rapid a change can cause rumen acidification.

What daily gains are considered good?

During intensive fattening, especially in the first phase, weight gains of 1.5-2.0 kg per day are realistic. If the result is significantly lower, it's worth checking silage quality, protein intake, water availability, and digestive health.

When to change the bulls' feed ration?

A good rule of thumb is to adjust the ration every 50-60 kg of body weight. As the animal grows, the proportion of concentrate feed typically increases, and protein requirements also change. Make changes gradually, not all at once.

How much high-protein feed should be in the mixture?

During the initial fattening period, high-protein components typically constitute approximately 20-30% of the concentrate portion of the ration. During the finishing phase, this proportion often drops to 10-15% as protein utilization efficiency decreases. Accurate values should be based on feed analysis.

How much water does a fattened bull need?

As a guide, cattle require approximately 5-7 kg of water per 1 kg of dry matter feed. If a bull eats 10 kg of DM, it may need 50-70 liters of water per day, and even more in hot weather. Constant access to clean water is just as important as the ration itself.

Properly managed fattening is based on high-quality volume, a reasonable proportion of concentrate feed, and regular ration adjustments as the animals grow. By monitoring protein, energy, structure, water, and minerals, you'll be much more likely to achieve stable growth without unnecessary health and economic losses.

Find out more – Click here: https://ruminta.eu/

Artykuł przygotowany przy wsparciu AI

Recent posts

Ceny mleka Październik 2026-02
Pulmomix Herbal i Pulmoshot zestaw
Ceny mleka Wrzesien 2026 PL-05
Przewijanie do góry